NAME

Net::SSH2 - Support for the SSH 2 protocol via libssh2.

SYNOPSIS

use Net::SSH2;

my $ssh2 = Net::SSH2->new();

$ssh2->connect('example.com')
  or $ssh2->die_with_error;

$ssh2->check_hostkey('ask')
  or $ssh2->die_with_error;

$ssh2->auth_publickey($ENV{USER}, "$ENV{HOME}/.ssh/id_rsa.pub", "$ENV{HOME}/.ssh/id_rsa")
  or $ssh2->die_with_error;

my $chan = $ssh2->channel()
  or $ssh2->die_with_error;

$chan->exec('ls')
  or $ssh2->die_with_error;

print while <$chan>;

print "EXIT CODE: ", $chan->exit_status, "\n";

$chan->close;

my $sftp = $ssh2->sftp()
  or $ssh2->die_with_error;;

my $fh = $sftp->open('/etc/passwd')
  or $sftp->die_with_error;

print while <$fh>;

DESCRIPTION

Net::SSH2 is a Perl interface to the libssh2 (http://www.libssh2.org) library. It supports the SSH2 protocol (there is no support for SSH1) with all of the key exchanges, ciphers, and compression of libssh2.

Even if the module can be compiled and linked against very old versions of the library, nothing below 1.5.0 should really be used (older versions were quite buggy and unreliable) and version 1.7.0 or later is recommended.

Error handling

Unless otherwise indicated, methods return a true value on success and undef on failure; use the "error" method to get extended error information.

Important: methods in Net::SSH2 not backed by libssh2 functions (i.e. "check_hostkey" or SCP related methods) require libssh2 1.7.0 or later in order to set the error state. That means that after any of those methods fails, "error" would not return the real code but just some bogus result when an older version of the library is used.

Typical usage

The typical usage order is as follows:

Create the SSH2 object calling "new".
Configure the session if required. For instance, enabling compression or picking some specific encryption methods.
Establish the SSH connection calling the method "connect".
Check the remote host public key calling "check_hostkey".
Authenticate calling the required authentication methods.
Call "channel" and related methods to create new bidirectional communication channels over the SSH connection.
Close the connection letting the Net::SSH2 object go out of scope or calling "disconnect" explicitly.

CONSTANTS

All the constants defined in libssh2 can be imported from Net::SSH2.

For instance:

use Net::SSH2 qw(LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE
                 LIBSSH2_CHANNEL_FLUSH_ALL
                 LIBSSH2_HOSTKEY_POLICY_ASK);

Though note that most methods accept the uncommon part of the constant name as a string. For instance the following two method calls are equivalent:

$channel->ext_data(LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE);
$channel->ext_data('merge');

Tags can be used to import the following constant subsets:

callback channel error socket trace hash method
disconnect policy fx fxf sftp

The tag all can also be used to import all of them.

METHODS

new ( %options )

Create new Net::SSH2 object representing a SSH session.

The accepted options are as follows:

timeout

Sets the default timeout in milliseconds. See "timeout".

trace

Sets tracing. See "trace".

Example:

my $ssh2 = Net::SSH2->new(trace => -1);

Note that tracing requires a version of libssh2 compiled with debugging support.

debug

Enable debugging. See "debug".

compress

Sets flag LIBSSH2_FLAG_COMPRESS. See "flag".

sigpipe

Sets flag LIBSSH2_FLAG_SIGPIPE. See "flag".

banner ( text )

Set the SSH2 banner text sent to the remote host (prepends required "SSH-2.0-").

version

In scalar context, returns libssh2 version/patch e.g. 0.18 or "0.18.0-20071110". In list context, returns that version plus the numeric version (major, minor, and patch, each encoded as 8 bits, e.g. 0x001200 for version 0.18) and the default banner text (e.g. "SSH-2.0-libssh2_0.18.0-20071110").

error

Returns the last error code. In list context, returns (code, error name, error string).

Note that the returned error value is only meaningful after some other method indicates an error by returning false.

die_with_error ( [message] )

Calls die with the given message and the error information from the object appended.

For instance:

$ssh2->connect("ajhkfhdklfjhklsjhd", 22)
    or $ssh2->die_with_error;
# dies as:
#    Unable to connect to remote host: Invalid argument (-1 LIBSSH2_ERROR_SOCKET_NONE)

sock

Returns a reference to the underlying IO::Socket object (usually a derived class as IO::Socket::IP or IO::Socket::INET), or undef if not yet connected.

trace

Calls libssh2_trace with supplied bitmask. In order to enable all tracing pass -1 as follows:

$ssh2->trace(-1);

A version of libssh2 compiled with tracing support is required.

timeout ( timeout_ms )

Enables a global timeout (in milliseconds) which will affect every action (requires libssh2 1.2.9 or later).

By default, or if you set the timeout to zero, Net::SSH2 has no timeout.

Note that timeout errors may leave the SSH connection in an inconsistent state and further operations may fail or behave incorrectly. Actually, some methods are able to recover after a timeout error and others are not.

Don't hesitate to report any issue you encounter related to this so that it can be fixed or at least, documented!

method ( type [, values... ] )

Sets or gets a method preference. For get, pass in the type only; to set, pass in either a list of values or a comma-separated string. Values can only be queried after the session is connected.

The following methods can be set or queried:

LIBSSH2_METHOD_KEX

Key exchange method names. Supported values:

diffie-hellman-group1-sha1: Diffie-Hellman key exchange with SHA-1 as hash, and Oakley Group 2 (see RFC 2409).
diffie-hellman-group14-sha1: Diffie-Hellman key exchange with SHA-1 as hash, and Oakley Group 14 (see RFC 3526).
diffie-hellman-group-exchange-sha1: Diffie-Hellman key exchange with SHA-1 as hash, using a safe-prime/generator pair (chosen by server) of arbitrary strength (specified by client) (see IETF draft secsh-dh-group-exchange).

LIBSSH2_METHOD_HOSTKEY

Public key algorithms. Supported values:

ssh-dss: Based on the Digital Signature Standard (FIPS-186-2).
ssh-rsa: Based on PKCS#1 (RFC 3447).

LIBSSH2_METHOD_CRYPT_CS

Encryption algorithm from client to server. Supported algorithms:

aes256-cbc: AES in CBC mode, with 256-bit key.
rijndael-cbc@lysator.liu.se: Alias for aes256-cbc.
aes192-cbc: AES in CBC mode, with 192-bit key.
aes128-cbc: AES in CBC mode, with 128-bit key.
blowfish-cbc: Blowfish in CBC mode.
arcfour: ARCFOUR stream cipher.
cast128-cbc: CAST-128 in CBC mode.
3des-cbc: Three-key 3DES in CBC mode.
none: No encryption.

LIBSSH2_METHOD_CRYPT_SC

Encryption algorithm from server to client. See the LIBSSH2_METHOD_CRYPT_CS entry above for supported algorithms.

LIBSSH2_METHOD_MAC_CS

Message Authentication Code (MAC) algorithms from client to server. Supported values:

hmac-sha1: SHA-1 with 20-byte digest and key length.
hmac-sha1-96: SHA-1 with 20-byte key length and 12-byte digest length.
hmac-md5: MD5 with 16-byte digest and key length.
hmac-md5-96: MD5 with 16-byte key length and 12-byte digest length.
hmac-ripemd160: RIPEMD-160 algorithm with 20-byte digest length.
hmac-ripemd160@openssh.com: Alias for hmac-ripemd160.
none: No encryption.

LIBSSH2_METHOD_MAC_SC

Message Authentication Code (MAC) algorithms from server to client. See LIBSSH2_METHOD_MAC_CS for supported algorithms.

LIBSSH2_METHOD_COMP_CS

Compression methods from client to server. Supported values:

zlib: The "zlib" compression method as described in RFC 1950 and RFC 1951.
none: No compression

LIBSSH2_METHOD_COMP_SC

Compression methods from server to client. See LIBSSH2_METHOD_COMP_CS for supported compression methods.

connect ( handle | host [, port])

The argument combinations accepted are as follows:

a glob or IO::* object reference

Note that tied file handles are not acceptable. The underlying libssh2 requires real file handles.

host [, port]

In order to handle IPv6 addresses the optional module IO::Socket::IP is required.

The port number defaults to 22.

This method used to accept a Timeout argument. That feature has been replaced by the constructor timeout option but note that it takes milliseconds instead of seconds!

disconnect ( [description [, reason [, language]]] )

Sends a clean disconnect message to the remote server. Default values are empty strings for description and language, and SSH_DISCONNECT_BY_APPLICATION for the reason.

hostname

The name of the remote host given at connect time or retrieved from the TCP layer.

port

The port number of the remote SSH server.

hostkey_hash ( hash type )

Returns a hash of the host key; note that the key is raw data and may contain nulls or control characters.

The type may be as follows:

LIBSSH2_HOSTKEY_HASH_MD5: MD5 hash, 16 bytes long (requires libssh2 compiled with MD5 support).
LIBSSH2_HOSTKEY_HASH_SHA1: SHA1 hash, 20 bytes long.

Note: in previous versions of the module this method was called hostkey.

remote_hostkey

Returns the public key from the remote host and its type which is one of LIBSSH2_HOSTKEY_TYPE_RSA, LIBSSH2_HOSTKEY_TYPE_DSS, or LIBSSH2_HOSTKEY_TYPE_UNKNOWN.

check_hostkey( [policy, [known_hosts_path [, comment] ] ] )

Looks for the remote host key inside the given known host file (defaults to ~/.ssh/known_hosts).

On success, this method returns the result of the call done under the hood to Net::SSH2::KnownHost::check (i.e. LIBSSH2_KNOWNHOST_CHECK_MATCH, LIBSSH2_KNOWNHOST_CHECK_FAILURE, LIBSSH2_KNOWNHOST_CHECK_NOTFOUND or LIBSSH2_KNOWNHOST_CHECK_MISMATCH).

On failure it returns undef.

The accepted policies are as follows:

LIBSSH2_HOSTKEY_POLICY_STRICT

Only host keys already present in the known hosts file are accepted.

This is the default policy.

LIBSSH2_HOSTKEY_POLICY_ASK

If the host key is not present in the known hosts file, the user is asked if it should be accepted or not.

If accepted, the key is added to the known host file with the given comment.

LIBSSH2_HOSTKEY_POLICY_TOFU

Trust On First Use: if the host key is not present in the known hosts file, it is added there and accepted.

LIBSSH2_HOSTKEY_POLICY_ADVISORY

The key is always accepted, but it is never saved into the known host file.

callback

If a reference to a subroutine is given, it is called when the key is not present in the known hosts file or a different key is found. The arguments passed to the callback are the session object, the matching error (LIBSSH2_KNOWNHOST_CHECK_FAILURE, LIBSSH2_KNOWNHOST_CHECK_NOTFOUND or LIBSSH2_KNOWNHOST_CHECK_MISMATCH) and the comment.

auth_list ( [username] )

Returns the authentication methods accepted by the server. In scalar context the methods are returned as a comma separated string.

When the server accepted an unauthenticated session for the given username, this method returns undef but "auth_ok" returns true.

auth_ok

Returns true when the session is authenticated.

auth_password ( username [, password [, callback ]] )

Authenticates using a password.

If the password has expired, if a callback code reference was given, it's called as callback($self, $username) and should return a password. If no callback is provided, LIBSSH2_ERROR_PASSWORD_EXPIRED is returned.

auth_password_interact ( username [, callback])

Prompts the user for the password interactively (requires Term::ReadKey).

auth_publickey ( username, publickey_path, privatekey_path [, passphrase ] )

Authenticate using the given private key and an optional passphrase.

When libssh2 is compiled using OpenSSL as the crypto backend, passing this method undef as the public key argument is acceptable (OpenSSL is able to extract the public key from the private one).

auth_publickey_frommemory ( username, publickey_blob, privatekey_blob [, passphrase ] )

Authenticate using the given public/private key and an optional passphrase. The keys must be PEM encoded (requires libssh2 1.6.0 or later with the OpenSSL backend).

auth_hostbased ( username, publickey, privatekey, hostname, [, local username [, passphrase ]] )

Host-based authentication using an optional passphrase. The local username defaults to be the same as the remote username.

auth_keyboard ( username, password | callback )

Authenticate using keyboard-interactive. Takes either a password, or a callback code reference which is invoked as callback->(self, username, name, instruction, prompt...) (where each prompt is a hash with text and echo keys, signifying the prompt text and whether the user input should be echoed, respectively) which should return an array of responses.

If only a username is provided, the default callback will handle standard interactive responses (requires Term::ReadKey)

auth_agent ( username )

Try to authenticate using an SSH agent (requires libssh2 1.2.3).

auth ( ... )

This is a general, prioritizing authentication mechanism that can use any of the previous methods. You provide it some parameters and (optionally) a ranked list of methods you want considered (defaults to all). It will remove any unsupported methods or methods for which it doesn't have parameters (e.g. if you don't give it a public key, it can't use publickey or hostkey), and try the rest, returning whichever one succeeded or undef if they all failed. If a parameter is passed with an undef value, a default value will be supplied if possible.

The parameters are:

rank: An optional ranked list of methods to try. The names should be the names of the Net::SSH2 auth methods, e.g. keyboard or publickey, with the addition of keyboard-auto for automated keyboard-interactive and password-interact which prompts the user for the password interactively.
username
password
publickey
privatekey: privatekey and publickey are file paths.
passphrase
hostname
local_username
interact: If this option is set to a true value, interactive methods will be enabled.
fallback: If a password is given but authentication using it fails, the module will fall back to ask the user for another password if this parameter is set to a true value.
cb_keyboard: auth_keyboard callback.
cb_password: auth_password callback.

For historical reasons and in order to maintain backward compatibility with older versions of the module, when the password argument is given, it is also used as the passphrase (and a deprecation warning generated).

In order to avoid that behaviour the passphrase argument must be also passed (it could be undef). For instance:

$ssh2->auth(username => $user,
            privatekey => $privatekey_path,
            publickey => $publickey_path,
            password => $password,
            passphrase => undef);

This work around will be removed in a not too distant future version of the module.

flag (key, value)

Sets the given session flag.

The currently supported flag values are:

LIBSSH2_FLAG_COMPRESS

If set before the connection negotiation is performed, compression will be negotiated for this connection.

Compression can also be enabled passing option compress to the constructor new.

LIBSSH2_FLAG_SIGPIPE

if set, Net::SSH2/libssh2 will not attempt to block SIGPIPEs but will let them trigger from the underlying socket layer.

keepalive_config(want_reply, interval)

Set how often keepalive messages should be sent.

want_reply indicates whether the keepalive messages should request a response from the server. interval is number of seconds that can pass without any I/O.

keepalive_send

Send a keepalive message if needed.

On failure returns undef. On success returns how many seconds you can sleep after this call before you need to call it again.

Note that the underlying libssh2 function libssh2_keepalive_send can not recover from EAGAIN errors. If this method fails with such error, the SSH connection may become corrupted.

The usage of this function is discouraged.

channel ( [type, [window size, [packet size]]] )

Creates and returns a new channel object. See Net::SSH2::Channel.

Type, if given, must be session (a reminiscence of an old, more generic, but never working wrapping).

tcpip ( host, port [, shost, sport ] )

Creates a TCP connection from the remote host to the given host:port, returning a new channel.

The shost and sport arguments are merely informative and passed to the remote SSH server as the origin of the connection. They default to 127.0.0.1:22.

Note that this method does not open a new port on the local machine and forwards incoming connections to the remote side.

listen ( port [, host [, bound port [, queue size ]]] )

Sets up a TCP listening port on the remote host. Host defaults to 0.0.0.0; if bound port is provided, it should be a scalar reference in which the bound port is returned. Queue size specifies the maximum number of queued connections allowed before the server refuses new connections.

Returns a new Net::SSH2::Listener object.

scp_get ( remote_path [, local_path ] )

Retrieve a file with SCP. Local path defaults to basename of remote.

Alternatively, local_path may be an already open file handle or an IO::Handle object (e.g. IO::File, IO::Scalar).

scp_put ( local_path [, remote_path ] )

Send a file with SCP. Remote path defaults to same as local.

Alternatively, local_path may be an already open file handle or a reference to a IO::Handle object (it must have a valid stat method).

sftp

Return SecureFTP interface object (see Net::SSH2::SFTP).

Note that SFTP support in libssh2 is pretty rudimentary. You should consider using Net::SFTP::Foreign with the Net::SSH2 backend Net::SFTP::Foreign::Backend::Net_SSH2 instead.

public_key

Return public key interface object (see Net::SSH2::PublicKey).

known_hosts

Returns known hosts interface object (see Net::SSH2::KnownHosts).

poll ( timeout, arrayref of hashes )

Deprecated: the poll functionality in libssh2 is deprecated and its usage disregarded. Session methods "sock" and "block_directions" can be used instead to integrate Net::SSH2 inside an external event loop.

Pass in a timeout in milliseconds and an arrayref of hashes with the following keys:

handle: May be a Net::SSH2::Channel or Net::SSH2::Listener object, integer file descriptor, or perl file handle.
events: Requested events. Combination of LIBSSH2_POLLFD_* constants (with the POLL prefix stripped if present), or an arrayref of the names ('in', 'hup' etc.).
revents: Returned events. Returns a hash with the (lowercased) names of the received events ('in', 'hup', etc.) as keys with true values, and a value key with the integer value.

Returns undef on error, or the number of active objects.

block_directions

Get the blocked direction after some method returns LIBSSH2_ERROR_EAGAIN.

Returns LIBSSH2_SESSION_BLOCK_INBOUND or/and LIBSSH2_SESSION_BLOCK_OUTBOUND.

debug ( state )

Class method (affects all Net::SSH2 objects).

Pass 1 to enable, 0 to disable. Debug output is sent to STDERR.

blocking ( flag )

Enable or disable blocking.

A good number of the methods in Net::SSH2/libssh2 can not work in non-blocking mode. Some of them may just forcibly enable blocking during its execution. A few may even corrupt the SSH session or crash the program.

The ones that can be safely called are read and, with some caveats, write. See "write" in Net::SSH2::Channel.

Don't hesitate to report any bug you found in that area!

INTEROPERABILITY AND OTHER KNOWN ISSUES

Protocol versions

The underlying libssh2 library does support version 2 of the SSH protocol exclusively (hopefully, version 1 usage is almost extinct.)

The SFTP client implements version 3 of the SFTP protocol.

Key formats

Private and public keys can be generated and stored using different formats and cyphers. Which ones are accepted by Net::SSH2 depends on the libssh2 version being used and of the underlying crypto backend it was configured to use at build time (OpenSSL libssl or libgcrypt).

An increasingly common problem is that OpenSSH since version 7.8 (released 2018-8-24) generates keys by default using the format RFC4716 which is not supported by the default crypto backend (libssl).

Keys can be converted inplace to the old PEM format using ssh-keygen(1) as follows:

$ ssh-keygen -p -m PEM -N "" -f ~/.ssh/id_rsa

On Windows, PuTTYgen (which is part of the PuTTY distribution) can be used to convert keys.

Another common issue is that in the last years OpenSSH has incorporated several new cyphers that are not supported by any version of libssh2 yet. Currently the best option from an interoperability standpoint is probably to stick to RSA key usage.

Security

Nowadays libssh2 development is not thrilling; new versions (even minor ones) are being released just every two or three years. On the other hand security issues are found and reported far more frequently. That means that Net::SSH2/libssh2 could be an easy attack vector.

So, Net::SSH2 should be used only in trusted environments. More specifically, using it to connect to untrusted third party computers over the Internet is probably a very bad idea!

COPYRIGHT AND LICENSE

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.0 or, at your option, any later version of Perl 5 you may have available.

To install Net::SSH2, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Net::SSH2

CPAN shell

perl -MCPAN -e shell
install Net::SSH2

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)